Saber & Stetson Display
Our Stetson, saber and spur display will make a great addition to your office wall or your award wall in your home! The back board is made of solid oak and the front is handmade from a variety of the following hardwoods:
-Poplar, mahogany, paddock, walnut, ash, white oak, red oak, purple heart, bubinga, wenge, morado, maple, and cherry woods.
The wood is all sanded, edged, conditioned with natural oil, and then sealed with a wax to bring out the detail in the wood and to protect the surface.
Item Details
The profile of this display is approximately 17" in height (including the hook height) x 10.5" in width x 11" depth (including the profile of the hook). The combinations of wood species will vary on the front board.
The hook is made of iron. Holes have been drilled and fitted to each iron holder. For shipping, the mount will be wrapped separate from the board and will require a screwdriver to reassemble once received. Screws are included.
Sawtooth hanging hardware is attached to the back along with rubber bumper pads on the bottom to maintain stability against the wall.
A personalized plate is optional with your purchase at no additional cost! The plate will typically be approximately 2" tall and 6" wide. Depending on the design, the shape may change to accommodate the design. The plate is laser-etched Flexibrass and will be attached to your hat rack before shipping.
**Stetson, saber, and spurs not included**
Our Stetson, saber and spur display will make a great addition to your office wall or your award wall in your home! The back board is made of solid oak and the front is handmade from a variety of the following hardwoods:
-Poplar, mahogany, paddock, walnut, ash, white oak, red oak, purple heart, bubinga, wenge, morado, maple, and cherry woods.
The wood is all sanded, edged, conditioned with natural oil, and then sealed with a wax to bring out the detail in the wood and to protect the surface.
Item Details
The profile of this display is approximately 17" in height (including the hook height) x 10.5" in width x 11" depth (including the profile of the hook). The combinations of wood species will vary on the front board.
The hook is made of iron. Holes have been drilled and fitted to each iron holder. For shipping, the mount will be wrapped separate from the board and will require a screwdriver to reassemble once received. Screws are included.
Sawtooth hanging hardware is attached to the back along with rubber bumper pads on the bottom to maintain stability against the wall.
A personalized plate is optional with your purchase at no additional cost! The plate will typically be approximately 2" tall and 6" wide. Depending on the design, the shape may change to accommodate the design. The plate is laser-etched Flexibrass and will be attached to your hat rack before shipping.
**Stetson, saber, and spurs not included**
Our Stetson, saber and spur display will make a great addition to your office wall or your award wall in your home! The back board is made of solid oak and the front is handmade from a variety of the following hardwoods:
-Poplar, mahogany, paddock, walnut, ash, white oak, red oak, purple heart, bubinga, wenge, morado, maple, and cherry woods.
The wood is all sanded, edged, conditioned with natural oil, and then sealed with a wax to bring out the detail in the wood and to protect the surface.
Item Details
The profile of this display is approximately 17" in height (including the hook height) x 10.5" in width x 11" depth (including the profile of the hook). The combinations of wood species will vary on the front board.
The hook is made of iron. Holes have been drilled and fitted to each iron holder. For shipping, the mount will be wrapped separate from the board and will require a screwdriver to reassemble once received. Screws are included.
Sawtooth hanging hardware is attached to the back along with rubber bumper pads on the bottom to maintain stability against the wall.
A personalized plate is optional with your purchase at no additional cost! The plate will typically be approximately 2" tall and 6" wide. Depending on the design, the shape may change to accommodate the design. The plate is laser-etched Flexibrass and will be attached to your hat rack before shipping.
**Stetson, saber, and spurs not included**
