Saber Display
$250.00
Our saber/sword display will make a great addition to your office wall or your award wall in your home! The back board is made of solid maple and the front is handmade from a variety of the following hardwoods:
-Poplar, mahogany, paddock, walnut, ash, white oak, red oak, purple heart, bubinga, wenge, morado, maple, and cherry woods.
The wood is all sanded, edged, conditioned with natural oil, and then sealed with a wax to bring out the detail in the wood and to protect the surface.
Item Details
The profile of this display is approximately 12" in height x 10.5" in width x 3" depth. The combinations of wood species will vary on the front board.
Sawtooth hanging hardware is attached to the back along with rubber bumper pads on the bottom to maintain stability against the wall.
A personalized plate is optional with your purchase at no additional cost! The plate will typically be approximately 2" tall and 6" wide. Depending on the design, the shape may change to accommodate the design. The plate is laser-etched Flexibrass and will be attached to your hat rack before shipping.
Custom Shape Variation- If you selected the variation for the front board to be a different shape, please send a photo of the shape in Etsy messages after your purchase. It will be the shape only with no distinctive designs added to it.
**Saber not included**
-Poplar, mahogany, paddock, walnut, ash, white oak, red oak, purple heart, bubinga, wenge, morado, maple, and cherry woods.
The wood is all sanded, edged, conditioned with natural oil, and then sealed with a wax to bring out the detail in the wood and to protect the surface.
Item Details
The profile of this display is approximately 12" in height x 10.5" in width x 3" depth. The combinations of wood species will vary on the front board.
Sawtooth hanging hardware is attached to the back along with rubber bumper pads on the bottom to maintain stability against the wall.
A personalized plate is optional with your purchase at no additional cost! The plate will typically be approximately 2" tall and 6" wide. Depending on the design, the shape may change to accommodate the design. The plate is laser-etched Flexibrass and will be attached to your hat rack before shipping.
Custom Shape Variation- If you selected the variation for the front board to be a different shape, please send a photo of the shape in Etsy messages after your purchase. It will be the shape only with no distinctive designs added to it.
**Saber not included**
Our saber/sword display will make a great addition to your office wall or your award wall in your home! The back board is made of solid maple and the front is handmade from a variety of the following hardwoods:
-Poplar, mahogany, paddock, walnut, ash, white oak, red oak, purple heart, bubinga, wenge, morado, maple, and cherry woods.
The wood is all sanded, edged, conditioned with natural oil, and then sealed with a wax to bring out the detail in the wood and to protect the surface.
Item Details
The profile of this display is approximately 12" in height x 10.5" in width x 3" depth. The combinations of wood species will vary on the front board.
Sawtooth hanging hardware is attached to the back along with rubber bumper pads on the bottom to maintain stability against the wall.
A personalized plate is optional with your purchase at no additional cost! The plate will typically be approximately 2" tall and 6" wide. Depending on the design, the shape may change to accommodate the design. The plate is laser-etched Flexibrass and will be attached to your hat rack before shipping.
Custom Shape Variation- If you selected the variation for the front board to be a different shape, please send a photo of the shape in Etsy messages after your purchase. It will be the shape only with no distinctive designs added to it.
**Saber not included**
-Poplar, mahogany, paddock, walnut, ash, white oak, red oak, purple heart, bubinga, wenge, morado, maple, and cherry woods.
The wood is all sanded, edged, conditioned with natural oil, and then sealed with a wax to bring out the detail in the wood and to protect the surface.
Item Details
The profile of this display is approximately 12" in height x 10.5" in width x 3" depth. The combinations of wood species will vary on the front board.
Sawtooth hanging hardware is attached to the back along with rubber bumper pads on the bottom to maintain stability against the wall.
A personalized plate is optional with your purchase at no additional cost! The plate will typically be approximately 2" tall and 6" wide. Depending on the design, the shape may change to accommodate the design. The plate is laser-etched Flexibrass and will be attached to your hat rack before shipping.
Custom Shape Variation- If you selected the variation for the front board to be a different shape, please send a photo of the shape in Etsy messages after your purchase. It will be the shape only with no distinctive designs added to it.
**Saber not included**
Our saber/sword display will make a great addition to your office wall or your award wall in your home! The back board is made of solid maple and the front is handmade from a variety of the following hardwoods:
-Poplar, mahogany, paddock, walnut, ash, white oak, red oak, purple heart, bubinga, wenge, morado, maple, and cherry woods.
The wood is all sanded, edged, conditioned with natural oil, and then sealed with a wax to bring out the detail in the wood and to protect the surface.
Item Details
The profile of this display is approximately 12" in height x 10.5" in width x 3" depth. The combinations of wood species will vary on the front board.
Sawtooth hanging hardware is attached to the back along with rubber bumper pads on the bottom to maintain stability against the wall.
A personalized plate is optional with your purchase at no additional cost! The plate will typically be approximately 2" tall and 6" wide. Depending on the design, the shape may change to accommodate the design. The plate is laser-etched Flexibrass and will be attached to your hat rack before shipping.
Custom Shape Variation- If you selected the variation for the front board to be a different shape, please send a photo of the shape in Etsy messages after your purchase. It will be the shape only with no distinctive designs added to it.
**Saber not included**
-Poplar, mahogany, paddock, walnut, ash, white oak, red oak, purple heart, bubinga, wenge, morado, maple, and cherry woods.
The wood is all sanded, edged, conditioned with natural oil, and then sealed with a wax to bring out the detail in the wood and to protect the surface.
Item Details
The profile of this display is approximately 12" in height x 10.5" in width x 3" depth. The combinations of wood species will vary on the front board.
Sawtooth hanging hardware is attached to the back along with rubber bumper pads on the bottom to maintain stability against the wall.
A personalized plate is optional with your purchase at no additional cost! The plate will typically be approximately 2" tall and 6" wide. Depending on the design, the shape may change to accommodate the design. The plate is laser-etched Flexibrass and will be attached to your hat rack before shipping.
Custom Shape Variation- If you selected the variation for the front board to be a different shape, please send a photo of the shape in Etsy messages after your purchase. It will be the shape only with no distinctive designs added to it.
**Saber not included**
